Posted on

using silver to femize cannabis seeds

How to Make Feminized Seeds with Colloidal Silver

We describe an experiment which gave us about 1500 fem seeds from a 20-inch weed plant using colloidal silver and self-pollination

We were curious how easy it was to make feminized seeds with colloidal silver at home. So we ran a little experiment and got more than 1500 viable beans without any issues. You too can do the same and make a nice stash of female plant seeds for yourself by following these step-by-step instructions.

But let’s start with a bit of theory (you can skip this part and get down to business straightaway).

Table of Contents

What are Feminized Seeds, and How are Seeds Feminized?

In nature, cannabis plants have two distinct sexes: male and female. However, only female plants produce buds for smoking. And if these buds catch some pollen, they will be subpar in quality because they will be full of seeds and not so big and also less resinous. That’s why growers who use regular seeds must watch their plants closely and cull all males in their garden as soon as they reveal their sex. Not very convenient, is it?

It all changed with the introduction of seeds that grow into fem plants in 99% of cases. They were named feminized seeds. So, are feminized seeds always female? In the majority of cases, yes, they are guaranteed to be female. However there are ways to make fem seeds hermie, meaning they will turn male or at least produce a few male flowers inside female buds. This can happen for seeds with weak genetics, or it can be a reaction to stress.

Male Plants no Longer Necessary

And this is exactly the feature that is used for manipulating feminised plants into producing feminised seeds. You don’t need any males for that. If you use a male to pollinate a plant grown from a fem seed, the result will be a bunch of regular seeds. And if you want fem seeds only, you should use one female plant as mother and another female plant as father. Or, alternatively, you can opt for self-pollination: when a single plant is used to both produce pollen and grow seeds.

There are several methods to make a feminised plant turn male. We won’t discuss here the most barbarian one — when breeders subject their plants to high levels of stress and they are turning hermie as a result. Although, believe it or not, the first commercially available seeds were made exactly this way, back in the early 1990s. You may guess the obvious drawback of such seeds: plants grown from them often become hermaphrodites even under normal conditions.

There is a less invasive method that modern breeders use. I’m talking about spraying a plant (or an individual branch of a plant) with a colloidal silver solution. This changes the chemistry inside the plant to make fem seeds male, and does so without any stress. As a result, we get seeds on a female weed plant without making them prone to hermies.

How to Make Feminized Seeds Using Colloidal Silver Spray

First, you need to make a colloidal silver generator and use it to produce the solution for your feminized seed spray. It’s unbelievably cheap, quick, and easy. Judge for yourself by clicking the link above and reading our step-by-step guide. The result should look more or less like this:

You should start using your feminised seed spray on a plant as soon as it starts flowering. You can apply it on all branches or just one. In the latter case, cover the rest from spatter. Please remember that silver is a toxic heavy metal and can poison you. You should never smoke colloidal silver weed.

It had taken us 4 weeks before we saw clearly that male flowers began to form. It was our first experiment, and we wasted many days applying the solution with a paintbrush. Don’t do that. It’s stupid. Just cover the rest of the plant with a piece of plastic and spray the chosen branch until it’s thoroughly wet. Do it once a day.

At some point, you’ll notice little green balls appear among female hairs (pistils): first closer to the top, then further down. Continue to apply colloidal silver spray until male ‘balls’ completely oust female pistils and start to look like a bunch of grapes. Only then you can stop spraying.

See also  cannabis seeds leicester uk

And this is how another branch on the same plant looks. It was not sprayed, so it only has female flowers:

After another month the male flowers will turn yellow and start to open:

Pollen Everywhere

Pollination is in full swing now, even if you don’t see the pollen. It consists of millions of tiny particles, and they fly everywhere.

Btw, pollinating buds at such a late stage of flowering is not the best idea. It would be better if the male pollen were ready a couple of weeks earlier, when the buds weren’t that mature. That would result in a) more seeds, b) less time spent, and c) better quality seeds. Well, we’re not sure about c), but some people on forums say it’s true.

When the branch with male flowers on it is fully mature, cut it, place it on a table, and rub it with your fingers until all yellow flowers fall off:

Then move the flowers this way and that with a credit card. The pollen will stick to the card’s edge. Shake it off into a separate heap:

To store and later use the pollen more conveniently, you can mix it with the equal amount of flour:

We put the mixture into an empty gelatin capsule and placed it in the refrigerator for storage..

Let me stress that we never used the pollen harvested this way to sprinkle on the plant. All pollination happened before we cut off the male branch. The seeds were fully mature 3 weeks after that. In this photo, you see only some of them. Later, we harvested at least as much.

How Soon Can You Plant Seeds After Harvesting Them?

We spent some time looking for an answer. People on forums say that the fresher the seeds, the lower germination rates. If you want to have good germination, give your homemade seeds some time to dry. Let’s say a month or two. It would be enough to degrade the hormone that prevents seeds from sprouting.

Our Experiments with Self-Pollinated Feminized Seeds

Over the next couple of years, we did a lot of experiments with our homemade seeds. The germination rates were always close to 100%, although, we must confess, we handled the process in a most off-hand manner. It’s understandable when the seeds cost you pennies.

We brought several plants to maturity and can say that they are very true copies of the parent plant. All fems, no hermies. All start to flower automatically after 2.5-3 weeks, all have the same height as the parent, the same length of the flowering period, the same structure of buds, and the same type of high. We liked the original plant, so we also liked its copies.

To Recap

Making your own feminized seeds is fairly easy. If you want to make copies of an autoflower, this is the only way. If you want to copy a photoperiod strain, it works great as well, but you also have the option of taking cuttings. Cloning marijuana is quicker, but seeds are easier to give away or sell. Believe us: with our little harvest of seeds. we’ve made a lot of people happy.

How to Feminize Seeds

The cannabis industry has evolved more in the last 15 years than it has in the last century. Society has also evolved, allowing cannabis and the idea of weed to slowly make its way into pop culture, with more and more strains available as well as accessories for smoking or consuming cannabis. Nowadays, pretty much anyone can grow cannabis in their own house with all of the necessary equipment to make their own strains. Years ago only a select few had access to such equipment. Today we’re going to show you how to feminize seeds. You won’t need many items to do so, and the ones you do need are easy enough to get.

Like most living creatures, cannabis plants need a male and a female specimen to reproduce; the male pollinates the female plant which causes seeds to grow. The resulting seeds have genes from both the mother and father plants, so it has a 50% possibility of being female or male. This is why you need to find a way to get your seeds by using just female plants, completely getting rid of male genes, which only leaves the possibility for female seeds.

See also  tonics web seeds

How to Feminize Seeds | Tutorial

Many growers know that if you stress out cannabis plants, they can easily become hermaphoridtes (a plant with both male and female sex organs) which end up creating male flowers that create pollen which then “impregnates” the plant and others around it. The issue with stress-caused hermaphrodite plants is that most of the resulting seeds tend to be hermaphrodites too, so it’s not the best method to use and it also stresses your plants out quite a lot.

In order to turn a female plant male without stressing it out, all you need is some Silver Thiosulfate, also known as STS. If you apply STS to female plants it will modify their ethylene levels, which is the hormone in charge of determining the sex of certain plants. This causes female plants to change sex and turn into males without the disadvantage of male genes.

Silver Thiosulfate

Making your own STS only takes about 15 to 20 minutes and you’ll need two ingredients: Sodium Thiosulphate and Silver Nitrate, both of which can easily be found in any pharmacy and on our webstore. Sodium Thiosulfate is a neutral chemical salt that’s used to reduce side-effects in some cancer treatments and can easily be bought without a prescription.

You can acquire silver nitrate on our webstore, although some people prefer to extract it from other products that contain it, such as Argenpal, a product used to get rid of warts – each one of these little contains a very small amount of Silver Nitrate, so it’s probably better just to buy it directly without the need to spend more money or spend forever trying to extract the Silver Nitrate from the product itself. We stock Panreac Silver Nitrate, which may be a bit more expensive but you’re guaranteed the best quality, and it saves quite a lot of time.

How to Feminize Seeds | Making STS

Caution:

You’ll need protective material such as gloves, safety glasses and a face mask; STS can be quite toxic when inhaled and it can leave large burns on the skin. Make sure you don’t use any metallic objects when making STS – everything should be plastic, as metal can alter the composition and reduce efficiency.

Process:

Do not use metal instruments or tools in this process. The first thing you’ll need to do is grab a plastic cup and pour in 20ml of distilled water. Next, depending on your chosen method, get either 7 Argenpal sticks or 0.35g silver nitrate. If working with Argenplal, dilute the tips delicately in the water (the tip is where the silver nitrate is). Grab another plastic cup and add 30ml distilled water and 1.3g of sodium thiosulfate, mixing it slowly until it’s fully dissolved. Then, mix the contents of both glasses and mix slowly again – make sure to use a plastic spoon, no metal.

The result is 50ml of pure Silver Thiosulfate, much too potent to use on your plants, so you’ll need to water it down a bit. Add your Silver Thiosulfate to 400ml of distilled water, so you’ll have around 450ml of STS. Make sure to shake quite a lot until it’s completely mixed. It’s still much too concentrated to apply straight onto your plants; take 100ml of the mixture you just made and add it to 400ml mor of distilled water. You now have 500ml of a usable STS mixture that’s ready to be used on your plants.

Recommendation:

For maximum efficiency you’ll need to use it the same day you make it. If stored in a dark, cool space it can last up to 15 days but each day it’ll be a bit less potent. If you have it for over a week and haven’t used it we recommend making another batch if you want the best possible results.

See also  alchemist cannabis seeds.co.uk n

How to Feminize Seeds | How to use STS

STS is used by spraying it on your plants leaves, making sure that it’s entirely covered and dripping. We recommend taking the plant away from your growing area before beginning the process, or the mixture might end up getting on your other plants too. You’ll need to begin applying it 4 or 5 days after flipping the lights, right before your lights go off. This allows you to spray the plant without worrying about the light burning your plants. After 10 days, you need to respray your plants, using the same process, covering the plant in the mixture and letting it soak in in the dark.

The sprayed plant will begin growing male flowers with pollen with can then be used to pollinate whichever plant you want, causing seeds to appear that have absolutely no male genes in them. You can use the pollinated plant in order to make extracts from its resin; the amount of seeds it’ll produce will render it pretty much useless in as far as smokeable flowers. The plant that you’ve applied the STS to will need to be thrown away, as it’s much too toxic to do anything with and if you consume any of it, even its resin, you could run in to some health issues.

When should you polinate your plants?

In order to efficiently pollinate select plants, we recommend having two completely separate grow rooms or areas to work in. One should be for the plants that you’re planning on switching to male in order to obtain female polen; the other should be specifically for the plants that you plan on pollinating once you’ve reverted the other ones.

When using the pollen that you’ve collected from your reverted plants, you need to make sure that the plant that you plan on using it on is fully ready for it; this can depend on the strain you’re growing. The right time to begin applying feminized pollen is actually right when your plants begin to flow real flowers.

You generally want to use the pollen as fresh as possible on a plant that is fully ready to take it on, or else it simply might not work – it’s kind of like people, in that sense. Certain things need to be just right. To harvest large amounts of high quality seeds, you’re probably better off doing a few tests in order to find out when the right moment is. You can do this by testing it out on the same strain before going big.

How to Feminize Seeds | Make your own strains

When making your own seeds you can combine your favorite strains, resulting in a plant that you’ve created yourself that is 100% feminized. When you combine two strains, you’ll get various phenotypes with varying qualities and structures. It’s important that you use regular seeds to do this, as feminized ones are much too weak and might have issues such as stress and end up becoming hermaphrodites.

In order to stabilize the genes in your resulting plants, you’ll need to select the phenotypes you like the most, meaning that you’ll need to grow quite a lot of the seeds that you get from your feminized plant. Then, take a clone from each plant and set them to flower in order to study their characteristics. Once you’re done, you’ll need to pick two mother plants, revert them and cross them with each other to get a more balanced version. This process is repeated as many times as necessary in order to create a balanced strain that has the characteristics you’re looking for.

Feminizing cannabis seeds is quite the process. You need to be able to keep perfect track and control of the timing when it comes to flowering and pollen yield if you want the best possible results. Take your time, do a few controlled tests and then you can start making large amounts of your own seeds.